Module 2 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 2 gear has a circular pitch of 6.283 mm (0.2474 in) and a whole tooth depth of 4.5 mm (0.1772 in), addendum 2 mm (0.0787 in), dedendum 2.5 mm (0.0984 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 2 mm. The equivalent diametral pitch is 12.7. The nearest inch gear, 12 DP, does not mesh with it.

mModule
2 mm0.0787 in0.0787 in2 mm
pCircular pitch (πm)
6.283 mm0.2474 in0.2474 in6.283 mm
hWhole depth (2.25 m)
4.5 mm0.1772 in0.1772 in4.5 mm
DPEquivalent diametral pitch (25.4/m)
12.7

Drawing

Pitch linep 6.283 mmp 0.2474 ins 3.142 mms 0.1237 inh 4.5 mmh 0.1772 inha 2 mmha 0.0787 inhf 2.5 mmhf 0.0984 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 2 specifications

mModule2 mm0.0787 in
SeriesI
pCircular pitch (πm)6.283 mm0.2474 in
sTooth thickness (πm/2)3.142 mm0.1237 in
haAddendum (1 m)2 mm0.0787 in
hfDedendum (1.25 m)2.5 mm0.0984 in
hWhole depth (2.25 m)4.5 mm0.1772 in
cBottom clearance (0.25 m)0.5 mm0.0197 in
DPEquivalent diametral pitch (25.4/m)12.7
Nearest standard DP12

Also known as

M2MOD2

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.