Module 3.5 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 3.5 gear has a circular pitch of 10.996 mm (0.4329 in) and a whole tooth depth of 7.875 mm (0.3100 in), addendum 3.5 mm (0.1378 in), dedendum 4.375 mm (0.1722 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 3.5 mm. The equivalent diametral pitch is 7.26. The nearest inch gear, 8 DP, does not mesh with it.

mModule
3.5 mm0.1378 in0.1378 in3.5 mm
pCircular pitch (πm)
10.996 mm0.4329 in0.4329 in10.996 mm
hWhole depth (2.25 m)
7.875 mm0.3100 in0.3100 in7.875 mm
DPEquivalent diametral pitch (25.4/m)
7.26

Drawing

Pitch linep 10.996 mmp 0.4329 ins 5.498 mms 0.2164 inh 7.875 mmh 0.3100 inha 3.5 mmha 0.1378 inhf 4.375 mmhf 0.1722 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 3.5 specifications

mModule3.5 mm0.1378 in
SeriesII
pCircular pitch (πm)10.996 mm0.4329 in
sTooth thickness (πm/2)5.498 mm0.2164 in
haAddendum (1 m)3.5 mm0.1378 in
hfDedendum (1.25 m)4.375 mm0.1722 in
hWhole depth (2.25 m)7.875 mm0.3100 in
cBottom clearance (0.25 m)0.875 mm0.0344 in
DPEquivalent diametral pitch (25.4/m)7.26
Nearest standard DP8

Also known as

M3.5MOD3.5

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.