Module 4 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 4 gear has a circular pitch of 12.566 mm (0.4947 in) and a whole tooth depth of 9 mm (0.3543 in), addendum 4 mm (0.1575 in), dedendum 5 mm (0.1969 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 4 mm. The equivalent diametral pitch is 6.35. The nearest inch gear, 6 DP, does not mesh with it.

mModule
4 mm0.1575 in0.1575 in4 mm
pCircular pitch (πm)
12.566 mm0.4947 in0.4947 in12.566 mm
hWhole depth (2.25 m)
9 mm0.3543 in0.3543 in9 mm
DPEquivalent diametral pitch (25.4/m)
6.35

Drawing

Pitch linep 12.566 mmp 0.4947 ins 6.283 mms 0.2474 inh 9 mmh 0.3543 inha 4 mmha 0.1575 inhf 5 mmhf 0.1969 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 4 specifications

mModule4 mm0.1575 in
SeriesI
pCircular pitch (πm)12.566 mm0.4947 in
sTooth thickness (πm/2)6.283 mm0.2474 in
haAddendum (1 m)4 mm0.1575 in
hfDedendum (1.25 m)5 mm0.1969 in
hWhole depth (2.25 m)9 mm0.3543 in
cBottom clearance (0.25 m)1 mm0.0394 in
DPEquivalent diametral pitch (25.4/m)6.35
Nearest standard DP6

Also known as

M4MOD4

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.