Module 4.5 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 4.5 gear has a circular pitch of 14.137 mm (0.5566 in) and a whole tooth depth of 10.125 mm (0.3986 in), addendum 4.5 mm (0.1772 in), dedendum 5.625 mm (0.2215 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 4.5 mm. The equivalent diametral pitch is 5.64. The nearest inch gear, 6 DP, does not mesh with it.

mModule
4.5 mm0.1772 in0.1772 in4.5 mm
pCircular pitch (πm)
14.137 mm0.5566 in0.5566 in14.137 mm
hWhole depth (2.25 m)
10.125 mm0.3986 in0.3986 in10.125 mm
DPEquivalent diametral pitch (25.4/m)
5.64

Drawing

Pitch linep 14.137 mmp 0.5566 ins 7.069 mms 0.2783 inh 10.125 mmh 0.3986 inha 4.5 mmha 0.1772 inhf 5.625 mmhf 0.2215 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 4.5 specifications

mModule4.5 mm0.1772 in
SeriesII
pCircular pitch (πm)14.137 mm0.5566 in
sTooth thickness (πm/2)7.069 mm0.2783 in
haAddendum (1 m)4.5 mm0.1772 in
hfDedendum (1.25 m)5.625 mm0.2215 in
hWhole depth (2.25 m)10.125 mm0.3986 in
cBottom clearance (0.25 m)1.125 mm0.0443 in
DPEquivalent diametral pitch (25.4/m)5.64
Nearest standard DP6

Also known as

M4.5MOD4.5

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.