Module 5 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 5 gear has a circular pitch of 15.708 mm (0.6184 in) and a whole tooth depth of 11.25 mm (0.4429 in), addendum 5 mm (0.1969 in), dedendum 6.25 mm (0.2461 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 5 mm. The equivalent diametral pitch is 5.08. The nearest inch gear, 5 DP, does not mesh with it.

mModule
5 mm0.1969 in0.1969 in5 mm
pCircular pitch (πm)
15.708 mm0.6184 in0.6184 in15.708 mm
hWhole depth (2.25 m)
11.25 mm0.4429 in0.4429 in11.25 mm
DPEquivalent diametral pitch (25.4/m)
5.08

Drawing

Pitch linep 15.708 mmp 0.6184 ins 7.854 mms 0.3092 inh 11.25 mmh 0.4429 inha 5 mmha 0.1969 inhf 6.25 mmhf 0.2461 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 5 specifications

mModule5 mm0.1969 in
SeriesI
pCircular pitch (πm)15.708 mm0.6184 in
sTooth thickness (πm/2)7.854 mm0.3092 in
haAddendum (1 m)5 mm0.1969 in
hfDedendum (1.25 m)6.25 mm0.2461 in
hWhole depth (2.25 m)11.25 mm0.4429 in
cBottom clearance (0.25 m)1.25 mm0.0492 in
DPEquivalent diametral pitch (25.4/m)5.08
Nearest standard DP5

Also known as

M5MOD5

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.