Module 5.5 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 5.5 gear has a circular pitch of 17.279 mm (0.6803 in) and a whole tooth depth of 12.375 mm (0.4872 in), addendum 5.5 mm (0.2165 in), dedendum 6.875 mm (0.2707 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 5.5 mm. The equivalent diametral pitch is 4.62. The nearest inch gear, 5 DP, does not mesh with it.

mModule
5.5 mm0.2165 in0.2165 in5.5 mm
pCircular pitch (πm)
17.279 mm0.6803 in0.6803 in17.279 mm
hWhole depth (2.25 m)
12.375 mm0.4872 in0.4872 in12.375 mm
DPEquivalent diametral pitch (25.4/m)
4.62

Drawing

Pitch linep 17.279 mmp 0.6803 ins 8.639 mms 0.3401 inh 12.375 mmh 0.4872 inha 5.5 mmha 0.2165 inhf 6.875 mmhf 0.2707 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 5.5 specifications

mModule5.5 mm0.2165 in
SeriesII
pCircular pitch (πm)17.279 mm0.6803 in
sTooth thickness (πm/2)8.639 mm0.3401 in
haAddendum (1 m)5.5 mm0.2165 in
hfDedendum (1.25 m)6.875 mm0.2707 in
hWhole depth (2.25 m)12.375 mm0.4872 in
cBottom clearance (0.25 m)1.375 mm0.0541 in
DPEquivalent diametral pitch (25.4/m)4.62
Nearest standard DP5

Also known as

M5.5MOD5.5

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.