Module 6 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 6 gear has a circular pitch of 18.850 mm (0.7421 in) and a whole tooth depth of 13.5 mm (0.5315 in), addendum 6 mm (0.2362 in), dedendum 7.5 mm (0.2953 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 6 mm. The equivalent diametral pitch is 4.23. The nearest inch gear, 4 DP, does not mesh with it.

mModule
6 mm0.2362 in0.2362 in6 mm
pCircular pitch (πm)
18.850 mm0.7421 in0.7421 in18.850 mm
hWhole depth (2.25 m)
13.5 mm0.5315 in0.5315 in13.5 mm
DPEquivalent diametral pitch (25.4/m)
4.23

Drawing

Pitch linep 18.850 mmp 0.7421 ins 9.425 mms 0.3711 inh 13.5 mmh 0.5315 inha 6 mmha 0.2362 inhf 7.5 mmhf 0.2953 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 6 specifications

mModule6 mm0.2362 in
SeriesI
pCircular pitch (πm)18.850 mm0.7421 in
sTooth thickness (πm/2)9.425 mm0.3711 in
haAddendum (1 m)6 mm0.2362 in
hfDedendum (1.25 m)7.5 mm0.2953 in
hWhole depth (2.25 m)13.5 mm0.5315 in
cBottom clearance (0.25 m)1.5 mm0.0591 in
DPEquivalent diametral pitch (25.4/m)4.23
Nearest standard DP4

Also known as

M6MOD6

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.