Module 7 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 7 gear has a circular pitch of 21.991 mm (0.8658 in) and a whole tooth depth of 15.75 mm (0.6201 in), addendum 7 mm (0.2756 in), dedendum 8.75 mm (0.3445 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 7 mm. The equivalent diametral pitch is 3.63. The nearest inch gear, 4 DP, does not mesh with it.

mModule
7 mm0.2756 in0.2756 in7 mm
pCircular pitch (πm)
21.991 mm0.8658 in0.8658 in21.991 mm
hWhole depth (2.25 m)
15.75 mm0.6201 in0.6201 in15.75 mm
DPEquivalent diametral pitch (25.4/m)
3.63

Drawing

Pitch linep 21.991 mmp 0.8658 ins 10.996 mms 0.4329 inh 15.75 mmh 0.6201 inha 7 mmha 0.2756 inhf 8.75 mmhf 0.3445 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 7 specifications

mModule7 mm0.2756 in
SeriesII
pCircular pitch (πm)21.991 mm0.8658 in
sTooth thickness (πm/2)10.996 mm0.4329 in
haAddendum (1 m)7 mm0.2756 in
hfDedendum (1.25 m)8.75 mm0.3445 in
hWhole depth (2.25 m)15.75 mm0.6201 in
cBottom clearance (0.25 m)1.75 mm0.0689 in
DPEquivalent diametral pitch (25.4/m)3.63
Nearest standard DP4

Also known as

M7MOD7

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.