Module 8 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 8 gear has a circular pitch of 25.133 mm (0.9895 in) and a whole tooth depth of 18 mm (0.7087 in), addendum 8 mm (0.3150 in), dedendum 10 mm (0.3937 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 8 mm. The equivalent diametral pitch is 3.18. The nearest inch gear, 3 DP, does not mesh with it.

mModule
8 mm0.3150 in0.3150 in8 mm
pCircular pitch (πm)
25.133 mm0.9895 in0.9895 in25.133 mm
hWhole depth (2.25 m)
18 mm0.7087 in0.7087 in18 mm
DPEquivalent diametral pitch (25.4/m)
3.18

Drawing

Pitch linep 25.133 mmp 0.9895 ins 12.566 mms 0.4947 inh 18 mmh 0.7087 inha 8 mmha 0.3150 inhf 10 mmhf 0.3937 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 8 specifications

mModule8 mm0.3150 in
SeriesI
pCircular pitch (πm)25.133 mm0.9895 in
sTooth thickness (πm/2)12.566 mm0.4947 in
haAddendum (1 m)8 mm0.3150 in
hfDedendum (1.25 m)10 mm0.3937 in
hWhole depth (2.25 m)18 mm0.7087 in
cBottom clearance (0.25 m)2 mm0.0787 in
DPEquivalent diametral pitch (25.4/m)3.18
Nearest standard DP3

Also known as

M8MOD8

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.