M10 Hex Bolt Dimensions and Wrench Size
Hex Bolts
An M10 hex head bolt (ISO 4014 / ISO 4017) has a head 16 mm (0.630 in) across the flats (the wrench or socket size) and 6.4 mm (0.252 in) high. Across the corners the head measures at least 17.77 mm (0.700 in). The old DIN 931 / 933 head is 17 mm across the flats.
- sWidth across flats (ISO)
- 16 mm0.630 in0.630 in16 mm
- kHead height
- 6.4 mm0.252 in0.252 in6.4 mm
- eWidth across corners (min.)
- 17.77 mm0.700 in0.700 in17.77 mm
- PThread pitch
- 1.5 mm16.9 TPI16.9 TPI1.5 mm
Drawing
M10 specifications
| PThread pitch | 1.5 mm16.9 TPI |
|---|---|
| sWidth across flats (ISO) | 16 mm0.630 in |
| Width across flats (DIN 931/933) | 17 mm0.669 in |
| kHead height | 6.4 mm0.252 in |
| eWidth across corners (min.) | 17.77 mm0.700 in |
ISO vs DIN: an ISO 4017 M10 head is 16 mm across the flats, a DIN 933 M10 head is 17 mm. Both are common; a 17 mm wrench will not fit the ISO head and a 16 mm wrench slips on the DIN head.
Wrench and socket size for M10
M10 in other charts
All Hex Bolts sizes
Sources
- ISO 4014:2022, Fasteners, hexagon head bolts, product grades A and B
- ISO 4017:2022, Fasteners, hexagon head screws, product grades A and B
- ISO 272:1982, Fasteners, hexagon products, widths across flats
- DIN 933 / DIN 931 (withdrawn): Hexagon head screws and bolts, as reproduced in Böllhoff and Würth data sheets
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.