-32 Hydraulic Hose: 2" ID

Hydraulic Hose Sizes

-32 hose has a 2" inside diameter (2.000 in / 50.8 mm), DN51 in metric catalogues. Maximum working pressure: 375 psi (26 bar) for 100R1AT one-braid hose and 1125 psi (78 bar) for 100R2AT two-braid hose.

IDInside diameter
50.8 mm2.000 in2.000 in50.8 mm
DN (metric)
DN51
SAE 100R1AT (1 wire braid)
26 bar375 psi375 psi26 bar
SAE 100R2AT (2 wire braids)
78 bar1125 psi1125 psi78 bar

Drawing

ID 50.8 mmID 2.000 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-32 specifications

IDInside diameter2.000 in50.8 mm
Nominal ID2"
DN (metric)DN51
SAE 100R1AT (1 wire braid)26 bar375 psi
SAE 100R2AT (2 wire braids)78 bar1125 psi
SAE 100R13 (spiral)345 bar5000 psi
EN 853 1SN40 bar580 psi
EN 853 2SN80 bar1160 psi

Also known as

DN51

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.