-24 Hydraulic Hose: 1-1/2" ID

Hydraulic Hose Sizes

-24 hose has a 1-1/2" inside diameter (1.500 in / 38.1 mm), DN38 in metric catalogues.

IDInside diameter
38.1 mm1.500 in1.500 in38.1 mm
DN (metric)
DN38
SAE 100R2AT (2 wire braids)
86 bar1250 psi1250 psi86 bar

Drawing

ID 38.1 mmID 1.500 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-24 specifications

IDInside diameter1.500 in38.1 mm
Nominal ID1-1/2"
DN (metric)DN38
SAE 100R2AT (2 wire braids)86 bar1250 psi
SAE 100R13 (spiral)345 bar5000 psi
EN 853 1SN50 bar725 psi
EN 853 2SN90 bar1305 psi

Also known as

DN38

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.