-4 Hydraulic Hose: 1/4" ID

Hydraulic Hose Sizes

-4 hose has a 1/4" inside diameter (0.250 in / 6.4 mm), DN6 in metric catalogues. Maximum working pressure: 2750 psi (190 bar) for 100R1AT one-braid hose and 5000 psi (345 bar) for 100R2AT two-braid hose.

IDInside diameter
6.4 mm0.250 in0.250 in6.4 mm
DN (metric)
DN6
SAE 100R1AT (1 wire braid)
190 bar2750 psi2750 psi190 bar
SAE 100R2AT (2 wire braids)
345 bar5000 psi5000 psi345 bar

Drawing

ID 6.4 mmID 0.250 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-4 specifications

IDInside diameter0.250 in6.4 mm
Nominal ID1/4"
DN (metric)DN6
SAE 100R1AT (1 wire braid)190 bar2750 psi
SAE 100R2AT (2 wire braids)345 bar5000 psi
EN 853 1SN225 bar3263 psi
EN 853 2SN400 bar5802 psi

-4 two-braid hose is the common hose for gauge lines, pilot lines and small cylinders: 5,000 psi as SAE 100R2AT, 400 bar (5,800 psi) when dual-rated EN 853 2SN.

Also known as

DN6

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.