-5 Hydraulic Hose: 5/16" ID

Hydraulic Hose Sizes

-5 hose has a 5/16" inside diameter (0.313 in / 7.9 mm), DN8 in metric catalogues. Maximum working pressure: 2500 psi (172 bar) for 100R1AT one-braid hose and 4250 psi (293 bar) for 100R2AT two-braid hose.

IDInside diameter
7.9 mm0.313 in0.313 in7.9 mm
DN (metric)
DN8
SAE 100R1AT (1 wire braid)
172 bar2500 psi2500 psi172 bar
SAE 100R2AT (2 wire braids)
293 bar4250 psi4250 psi293 bar

Drawing

ID 7.9 mmID 0.313 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-5 specifications

IDInside diameter0.313 in7.9 mm
Nominal ID5/16"
DN (metric)DN8
SAE 100R1AT (1 wire braid)172 bar2500 psi
SAE 100R2AT (2 wire braids)293 bar4250 psi
EN 853 1SN215 bar3118 psi
EN 853 2SN350 bar5076 psi

Also known as

DN8

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.