-8 Hydraulic Hose: 1/2" ID

Hydraulic Hose Sizes

-8 hose has a 1/2" inside diameter (0.500 in / 12.7 mm), DN12 in metric catalogues. Maximum working pressure: 2000 psi (138 bar) for 100R1AT one-braid hose and 3500 psi (241 bar) for 100R2AT two-braid hose.

IDInside diameter
12.7 mm0.500 in0.500 in12.7 mm
DN (metric)
DN12
SAE 100R1AT (1 wire braid)
138 bar2000 psi2000 psi138 bar
SAE 100R2AT (2 wire braids)
241 bar3500 psi3500 psi241 bar

Drawing

ID 12.7 mmID 0.500 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-8 specifications

IDInside diameter0.500 in12.7 mm
Nominal ID1/2"
DN (metric)DN12
SAE 100R1AT (1 wire braid)138 bar2000 psi
SAE 100R2AT (2 wire braids)241 bar3500 psi
SAE 100R12 (4 spiral)276 bar4000 psi
EN 853 1SN160 bar2321 psi
EN 853 2SN275 bar3989 psi

-8 (1/2 in, DN12) is the most common size on tractors and loaders. 100R2AT is rated 3,500 psi, 2SN 275 bar.

Also known as

DN12

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.