-10 Hydraulic Hose: 5/8" ID

Hydraulic Hose Sizes

-10 hose has a 5/8" inside diameter (0.625 in / 15.9 mm), DN16 in metric catalogues. Maximum working pressure: 1500 psi (103 bar) for 100R1AT one-braid hose and 2750 psi (190 bar) for 100R2AT two-braid hose.

IDInside diameter
15.9 mm0.625 in0.625 in15.9 mm
DN (metric)
DN16
SAE 100R1AT (1 wire braid)
103 bar1500 psi1500 psi103 bar
SAE 100R2AT (2 wire braids)
190 bar2750 psi2750 psi190 bar

Drawing

ID 15.9 mmID 0.625 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-10 specifications

IDInside diameter0.625 in15.9 mm
Nominal ID5/8"
DN (metric)DN16
SAE 100R1AT (1 wire braid)103 bar1500 psi
SAE 100R2AT (2 wire braids)190 bar2750 psi
SAE 100R12 (4 spiral)276 bar4000 psi
EN 853 1SN130 bar1885 psi
EN 853 2SN250 bar3626 psi

Also known as

DN16

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.