HP14×102 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP14
HP14×102 is an AISC HP bearing-pile shape. It is 14 in (355.6 mm) deep and 14.8 in (375.9 mm) wide, with a 0.705 in (17.9 mm) web and 0.705 in (17.9 mm) flanges, and weighs 102 lb/ft (151.8 kg/m). Area 30.1 in² (19,419 mm²); Ix = 1,050 in⁴ (43,704.3 cm⁴), Iy = 380 in⁴ (15,816.8 cm⁴).
- dDepth
- 355.6 mm14 in14 in355.6 mm
- bfFlange width
- 375.9 mm14.8 in14.8 in375.9 mm
- twWeb thickness
- 17.9 mm0.705 in0.705 in17.9 mm
- tfFlange thickness
- 17.9 mm0.705 in0.705 in17.9 mm
Drawing
HP14×102 specifications
| dDepth | 14 in355.6 mm |
|---|---|
| bfFlange width | 14.8 in375.9 mm |
| twWeb thickness | 0.705 in17.9 mm |
| tfFlange thickness | 0.705 in17.9 mm |
| kDesign value | 1.38 in35.1 mm |
| kDetailing value | 1 15/16 in49.2 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 102 lb/ft151.8 kg/m |
| AArea | 30.1 in²19,419 mm² |
| IxMoment of inertia, strong axis | 1,050 in⁴43,704.3 cm⁴ |
| ZxPlastic modulus, strong axis | 169 in³2769.4 cm³ |
| SxSection modulus, strong axis | 150 in³2458.1 cm³ |
| rxRadius of gyration, strong axis | 5.92 in150.4 mm |
| IyMoment of inertia, weak axis | 380 in⁴15,816.8 cm⁴ |
| ZyPlastic modulus, weak axis | 78.8 in³1291.3 cm³ |
| SySection modulus, weak axis | 51.4 in³842.3 cm³ |
| ryRadius of gyration, weak axis | 3.56 in90.4 mm |
| JTorsional constant | 5.39 in⁴224.35 cm⁴ |
| bf/2tfFlange slenderness | 10.5 |
| h/twWeb slenderness | 16.2 |
| Metric designation | HP360×152 |
Also known as
HP360×152
HP shapes of about the same weight in other sizes
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.