HP14×117 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP14
HP14×117 is an AISC HP bearing-pile shape. It is 14.2 in (360.7 mm) deep and 14.9 in (378.5 mm) wide, with a 0.805 in (20.4 mm) web and 0.805 in (20.4 mm) flanges, and weighs 117 lb/ft (174.1 kg/m). Area 34.4 in² (22,194 mm²); Ix = 1,220 in⁴ (50,780.2 cm⁴), Iy = 443 in⁴ (18,439.1 cm⁴).
- dDepth
- 360.7 mm14.2 in14.2 in360.7 mm
- bfFlange width
- 378.5 mm14.9 in14.9 in378.5 mm
- twWeb thickness
- 20.4 mm0.805 in0.805 in20.4 mm
- tfFlange thickness
- 20.4 mm0.805 in0.805 in20.4 mm
Drawing
HP14×117 specifications
| dDepth | 14.2 in360.7 mm |
|---|---|
| bfFlange width | 14.9 in378.5 mm |
| twWeb thickness | 0.805 in20.4 mm |
| tfFlange thickness | 0.805 in20.4 mm |
| kDesign value | 1.5 in38.1 mm |
| kDetailing value | 2 1/16 in52.4 mm |
| k1Detailing value | 1 5/8 in41.3 mm |
| WWeight | 117 lb/ft174.1 kg/m |
| AArea | 34.4 in²22,194 mm² |
| IxMoment of inertia, strong axis | 1,220 in⁴50,780.2 cm⁴ |
| ZxPlastic modulus, strong axis | 194 in³3179.1 cm³ |
| SxSection modulus, strong axis | 172 in³2818.6 cm³ |
| rxRadius of gyration, strong axis | 5.96 in151.4 mm |
| IyMoment of inertia, weak axis | 443 in⁴18,439.1 cm⁴ |
| ZyPlastic modulus, weak axis | 91.4 in³1497.8 cm³ |
| SySection modulus, weak axis | 59.5 in³975 cm³ |
| ryRadius of gyration, weak axis | 3.59 in91.2 mm |
| JTorsional constant | 8.02 in⁴333.82 cm⁴ |
| bf/2tfFlange slenderness | 9.25 |
| h/twWeb slenderness | 14.2 |
| Metric designation | HP360×174 |
Also known as
HP360×174
HP shapes of about the same weight in other sizes
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.