HP16×101 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP16
HP16×101 is an AISC HP bearing-pile shape. It is 15.5 in (393.7 mm) deep and 15.8 in (401.3 mm) wide, with a 0.625 in (15.9 mm) web and 0.625 in (15.9 mm) flanges, and weighs 101 lb/ft (150.3 kg/m). Area 29.9 in² (19,290 mm²); Ix = 1,300 in⁴ (54,110.1 cm⁴), Iy = 412 in⁴ (17,148.7 cm⁴).
- dDepth
- 393.7 mm15.5 in15.5 in393.7 mm
- bfFlange width
- 401.3 mm15.8 in15.8 in401.3 mm
- twWeb thickness
- 15.9 mm0.625 in0.625 in15.9 mm
- tfFlange thickness
- 15.9 mm0.625 in0.625 in15.9 mm
Drawing
HP16×101 specifications
| dDepth | 15.5 in393.7 mm |
|---|---|
| bfFlange width | 15.8 in401.3 mm |
| twWeb thickness | 0.625 in15.9 mm |
| tfFlange thickness | 0.625 in15.9 mm |
| kDesign value | 1.81 in46.0 mm |
| kDetailing value | 1 13/16 in46.0 mm |
| k1Detailing value | 1 1/2 in38.1 mm |
| WWeight | 101 lb/ft150.3 kg/m |
| AArea | 29.9 in²19,290 mm² |
| IxMoment of inertia, strong axis | 1,300 in⁴54,110.1 cm⁴ |
| ZxPlastic modulus, strong axis | 187 in³3064.4 cm³ |
| SxSection modulus, strong axis | 168 in³2753 cm³ |
| rxRadius of gyration, strong axis | 6.59 in167.4 mm |
| IyMoment of inertia, weak axis | 412 in⁴17,148.7 cm⁴ |
| ZyPlastic modulus, weak axis | 80.1 in³1312.6 cm³ |
| SySection modulus, weak axis | 52.2 in³855.4 cm³ |
| ryRadius of gyration, weak axis | 3.71 in94.2 mm |
| JTorsional constant | 5.07 in⁴211.03 cm⁴ |
| bf/2tfFlange slenderness | 12.6 |
| h/twWeb slenderness | 19 |
| Metric designation | HP410×151 |
Also known as
HP410×151
HP shapes of about the same weight in other sizes
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.