Inch Ball Bearing Size Chart: R Series and 1600 Series
Inch deep groove ball bearings (ABMA standard) are named by bore in sixteenths of an inch: R8 has a 8/16 = 1/2" bore, R12 a 3/4" bore. Many R sizes are wider when shielded or sealed than open (an R8 is 1/4" wide open and 5/16" with shields), so check which width you need.
Size chartTap a size for its drawing and full specs
| Bearing | dBore diametermmin | DOutside diametermmin | BWidth, openmmin | B₁Width, shielded / sealedmmin |
|---|---|---|---|---|
| Miniature / instrument (R1xx) | ||||
| R144 | 3.181/8 | 6.351/4 | — | 2.780.1094 |
| R166 | 4.763/16 | 9.523/8 | — | 3.181/8 |
| R168 | 6.351/4 | 9.523/8 | — | 3.181/8 |
| R188 | 6.351/4 | 12.701/2 | — | 4.763/16 |
| R series | ||||
| R2 | 3.181/8 | 9.523/8 | 3.970.1562 | 3.970.1562 |
| R3 | 4.763/16 | 12.701/2 | 3.970.1562 | 4.980.1960 |
| R4 | 6.351/4 | 15.885/8 | 4.980.1960 | 4.980.1960 |
| R6 | 9.523/8 | 22.227/8 | 5.560.2188 | 7.140.2812 |
| R8 | 12.701/2 | 28.581 1/8 | 6.351/4 | 7.945/16 |
| R10 | 15.885/8 | 34.931 3/8 | 7.140.2812 | 8.730.3438 |
| R12 | 19.053/4 | 41.281 5/8 | 7.945/16 | 11.117/16 |
| R14 | 22.227/8 | 47.631 7/8 | 9.523/8 | 12.701/2 |
| R16 | 25.401 | 50.802 | 9.523/8 | 12.701/2 |
| R18 | 28.581 1/8 | 53.972 1/8 | 9.523/8 | 12.701/2 |
| R20 | 31.751 1/4 | 57.152 1/4 | 9.523/8 | 12.701/2 |
| R24 | 38.101 1/2 | 66.682 5/8 | — | 14.299/16 |
| 1600 series | ||||
| 1602 | 6.351/4 | 17.4611/16 | 6.351/4 | — |
| 1603 | 7.945/16 | 22.227/8 | 7.150.2813 | — |
| 1604 | 9.523/8 | 22.227/8 | 7.150.2813 | — |
| 1605 | 7.945/16 | 23.020.9063 | 7.945/16 | — |
| 1606 | 9.523/8 | 23.020.9063 | 7.945/16 | — |
| 1607 | 11.117/16 | 23.020.9063 | 7.945/16 | — |
| 1614 | 9.523/8 | 28.581 1/8 | 9.523/8 | — |
| 1615 | 11.117/16 | 28.581 1/8 | 9.523/8 | — |
| 1616 | 12.701/2 | 28.581 1/8 | 9.523/8 | — |
| 1620 | 11.117/16 | 34.931 3/8 | 11.117/16 | — |
| 1621 | 12.701/2 | 34.931 3/8 | 11.117/16 | — |
| 1622 | 14.299/16 | 34.931 3/8 | 11.117/16 | — |
| 1623 | 15.885/8 | 34.931 3/8 | 11.117/16 | — |
| 1628 | 15.885/8 | 41.281 5/8 | 12.701/2 | — |
| 1630 | 19.053/4 | 41.281 5/8 | 12.701/2 | — |
| 1633 | 15.885/8 | 44.451 3/4 | 12.701/2 | — |
| 1635 | 19.053/4 | 44.451 3/4 | 12.701/2 | — |
| 1638 | 19.053/4 | 50.802 | 14.299/16 | — |
| 1640 | 22.227/8 | 50.802 | 14.299/16 | — |
| 1641 | 25.401 | 50.802 | 14.299/16 | — |
No exact match. The nearest sizes:
How to read inch bearing numbers
R series: the number is the bore in sixteenths of an inch: R4 = 1/4", R6 = 3/8", R8 = 1/2", R10 = 5/8", R12 = 3/4", R16 = 1". Each R size has one outside diameter. ZZ / 2Z = shields, 2RS = rubber seals; on R3 and R6 to R24 the shielded or sealed bearing is wider than the open one.
Miniature R1xx: after R1 come the outside diameter in sixteenths and the bore in thirty-seconds of an inch: R188 = OD 8/16 = 1/2", bore 8/32 = 1/4"; R166 = 3/8" OD, 3/16" bore; R144 = 1/4" OD, 1/8" bore. Stainless instrument bearings (S…, ABEC 3–7) and flanged versions (FR…) use the same numbers.
1600 series: a sequence number, not a code: 1614 is 3/8 × 1-1/8 × 3/8", 1616 is 1/2 × 1-1/8 × 3/8", 1630 is 3/4 × 1-5/8 × 1/2". The widths are the same open and shielded. 1600 bearings are common in power tools, go-karts and skateboard-style wheels.
About Inch Ball Bearings
Inch ball bearings are still standard in North American equipment: lawn and garden machinery, conveyor rollers, power tools, RC models, fishing reels and older electric motors. They are the same deep groove design as metric bearings, made to ABMA (ANSI) standards with precision grades ABEC 1 to ABEC 9 (ABEC 1 ≈ ISO P0, ABEC 3 ≈ P6, ABEC 5 ≈ P5, ABEC 7 ≈ P4).
Measure bore, OD and width with a caliper in inches, or convert: 1/2" = 12.7 mm, 1-1/8" = 28.575 mm. A metric bearing of almost the same size is not a substitute. A 12.7 mm shaft in a 12 mm bore will not go, and a 13 mm bore (none is standard) would be loose.
The open/shielded width difference matters most in R6–R24: a replacement shielded bearing may not fit a pocket machined for an open one. Where widths match (R2, R4 and the 1600 series) open and shielded bearings swap freely.
Questions
What size is an R8 bearing?
1/2" bore, 1-1/8" outside diameter, 1/4" wide open or 5/16" wide with shields or seals (12.7 × 28.575 × 6.35 / 7.94 mm).
Why is my shielded R6 wider than the open one?
In the R series the shielded and sealed versions are made wider to fit the closure: R6 is 7/32" open and 9/32" shielded. R2, R4 and the 1600 series have one width.
What does the R number mean?
The bore in sixteenths of an inch: R4 = 4/16 = 1/4", R10 = 10/16 = 5/8", R16 = 1".
What size is a 1630 bearing?
3/4" bore, 1-5/8" outside diameter, 1/2" wide. It has the same OD as an R12 but is wider, and its width is the same open or shielded.
Sources
- ABMA Standard 20: Radial bearings of ball, cylindrical roller and spherical roller types, metric and inch design
- SKF / MRC: R-series small inch size ball bearings; General Bearing Corp. catalogue
- NSK: Miniature and extra small ball bearings, inch series (R144, R188 …)
- Bearingworks: Bearing size charts, R and 1600 series
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.