UNC and UNF Thread Size Chart

Unified inch screw threads (ASME B1.1) from #0 to 1-1/2″, with coarse (UNC), fine (UNF) and extra-fine (UNEF) threads per inch, the standard 75 % tap drills and close/free clearance drills. The most common thread in the US, 1/4″-20 UNC, is tapped with a #7 drill (0.201″).

24 sizesChecked 2026-11-154 sources
#0 – 1/2″#0#2#4#6#8#101/45/163/81/21/2″ – 1-1/2″ (scale ÷ 3)1/25/83/47/811-1/41-1/2
Top row #0–1/2″, bottom row 1/2″–1-1/2″ at a smaller scale; tooth spacing is the real coarse pitch (UNF for #0).Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

24 of 24
SizedMajor diametermminUNC threads per inchmmTPIUNC tap drillUNF threads per inchmmTPIUNF tap drillUNEF threads per inchmmTPIClearance drill, close fitClearance drill, free fit
#01.520.0600——0.318803/64″—#52#50
#11.850.07300.39764#530.35372#53—#48#46
#22.180.08600.45456#500.39764#50—#43#41
#32.510.09900.52948#470.45456#45—#37#35
#42.840.11200.63540#430.52948#42—#32#30
#53.180.12500.63540#380.57744#37—#30#29
#63.510.13800.79432#360.63540#33—#27#25
#84.170.16400.79432#290.70636#29—#18#16
#104.830.19001.05824#250.79432#21—#9#7
#125.490.21601.05824#160.90728#140.79432#2#1
1/4″6.350.25001.27020#70.90728#30.79432FH
5/16″7.940.31251.41118F1.05824I0.79432PQ
3/8″9.520.37501.588165/16″1.05824Q0.79432WX
7/16″11.110.43751.81414U1.2702025/64″0.9072829/64″15/32″
1/2″12.700.50001.9541327/64″1.2702029/64″0.9072833/64″17/32″
9/16″14.290.56252.1171231/64″1.4111833/64″1.0582437/64″19/32″
5/8″15.880.62502.3091117/32″1.4111837/64″1.0582441/64″21/32″
3/4″19.050.75002.5401021/32″1.5881611/16″1.2702049/64″25/32″
7/8″22.220.87502.822949/64″1.8141413/16″1.2702057/64″29/32″
1″25.401.00003.17587/8″2.1171259/64″1.270201-1/64″1-1/32″
1-1/8″28.581.12503.629763/64″2.117121-3/64″1.41118——
1-1/4″31.751.25003.62971-7/64″2.117121-11/64″1.41118——
1-3/8″34.931.37504.23361-7/32″2.117121-19/64″1.41118——
1-1/2″38.101.50004.23361-11/32″2.117121-27/64″1.41118——

How to read an inch thread callout

An inch thread is written size – threads per inch – series – class: 1/4-20 UNC-2A. The size is the nominal major diameter, either a fraction (1/4″ = 0.250″) or a machine screw number below 1/4″ (#10 = 0.190″). The second number is threads per inch (TPI), not pitch: 20 TPI means a pitch of 1/20″ = 0.050″ = 1.27 mm.

UNC is the coarse series, UNF the fine series and UNEF the extra-fine series. Class 2A (external) and 2B (internal) is the normal fit, 3A/3B tighter, 1A/1B looser. UNR (rounded root on the bolt) is interchangeable with UN and is what most bolts are actually made to.

Machine screw numbers follow a simple rule: diameter = 0.060″ + 0.013″ × number. So #6 = 0.138″, #8 = 0.164″, #10 = 0.190″. To identify an unknown screw, measure the major diameter with a caliper and count threads over one inch (or use a thread gauge), then find the row with both values.

About UNC / UNF Threads

The Unified thread (ASME B1.1) is the standard inch thread in the United States and Canada and the inch thread used worldwide in aircraft, older British equipment and much imported machinery. It has the same 60° profile as the ISO metric thread; only the sizes and pitches differ, so metric and inch fasteners never interchange even when the diameters are close.

Each size has one coarse (UNC) thread, the default for bolts, nuts and tapped holes in steel, aluminum and cast iron, and one fine (UNF) thread, common in automotive and aerospace work, thin walls and adjustment screws. UNEF extra-fine threads are used on thin-walled tubing, fittings and instrument parts.

Tap drills in the chart are the usual 75 % thread sizes from the standard tap drill tables. A 75 % thread keeps almost all of the full strength while cutting much more easily than a full thread. For a quick estimate without a chart: tap drill ≈ major diameter − 1/TPI (1/4-20: 0.250 − 0.050 = 0.200″ → #7, 0.201″).

Clearance holes are the customary close fit (accurate location, little play) and free fit (easy assembly) drills. For structural steel and through-bolted joints, a hole 1/16″ over the bolt diameter is the common rule.

Inch and metric threads that are easy to mix up

1/4-20 vs M6 × 1, 5/16-18 vs M8 × 1.25, 3/8-16 vs M10 × 1.5, #10-24 vs M5 × 0.8, #6-32 vs M3.5 × 0.6. The diameters differ by only 0.2–0.5 mm, so the screw may start by hand and then bind or strip. Check the pitch: 20 TPI = 1.27 mm, 18 TPI = 1.41 mm, 16 TPI = 1.59 mm.

Thread series above 1″

Above 1″ the fine series stays at 12 TPI for every size, and the 8-thread series (8 UN) is common for large bolts and studs. 1″-14 UNS (once called 1″-14 NF) still appears on older equipment.

Questions

What size drill for a 1/4-20 tap?

A #7 drill (0.201″, 5.1 mm) for a 75 % thread. 13/64″ (0.2031″) also works and gives slightly less thread. For 1/4-28 UNF use a #3 drill (0.213″).

What is the tap drill for 5/16-18 and 3/8-16?

5/16-18 UNC uses a letter F drill (0.257″); 3/8-16 UNC uses a 5/16″ drill (0.3125″). The fine threads 5/16-24 and 3/8-24 use letter I (0.272″) and letter Q (0.332″).

What size drill for #10-24 and #10-32?

#10-24 UNC: #25 drill (0.1495″). #10-32 UNF: #21 drill (0.159″). For a clearance hole, #9 (0.196″) is a close fit and #7 (0.201″) a free fit.

What does 1/4-20 mean?

A 1/4″ (0.250″) diameter screw with 20 threads per inch, which is the UNC coarse thread for that size. The fine thread is 1/4-28 UNF.

What is the difference between UNC and UNF?

UNC has fewer, deeper threads per inch (1/2-13), UNF has more, shallower ones (1/2-20). UNC is the default and tolerates rough handling and soft materials; UNF is a little stronger in tension, allows finer adjustment and resists vibration loosening better.

How do I calculate an inch tap drill size?

Major diameter minus 1/TPI gives a hole for roughly 75–80 % thread: 3/8-16 → 0.375 − 0.0625 = 0.3125″ (5/16″). Pick the nearest number, letter or fractional drill from the chart.

Sources

  1. ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
  2. Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
  3. Little Machine Shop: Tap and clearance drill sizes
  4. Starrett: Tap drill sizes, close and free fit clearance drills

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.