1-3/8″ Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The 1-3/8″ unified thread has a major diameter of 1.3750 in (34.93 mm). Coarse thread (UNC): 6 TPI (4.233 mm), tap drill 1-7/32″. Fine thread (UNF): 12 TPI (2.117 mm), tap drill 1-19/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 34.93 mm1.3750 in1.3750 in34.93 mm
- UNC threads per inch
- 4.233 mm6 TPI6 TPI4.233 mm
- UNC tap drill
- 1-7/32″
- UNF threads per inch
- 2.117 mm12 TPI12 TPI2.117 mm
Drawing
1-3/8″ specifications
| dMajor diameter | 1.3750 in34.93 mm |
|---|---|
| UNC threads per inch | 6 TPI4.233 mm |
| UNC tap drill | 1-7/32″ |
| UNC tap drill (decimal) | 1.2188 in30.96 mm |
| UNF threads per inch | 12 TPI2.117 mm |
| UNF tap drill | 1-19/64″ |
| UNF tap drill (decimal) | 1.2969 in32.94 mm |
| UNEF threads per inch | 18 TPI1.411 mm |
| d₂Pitch diameter (basic) | 1.2667 in32.174 mm |
| D₁Minor diameter, nut (basic) | 1.1946 in30.343 mm |
Also known as
1-3/8-61-3/8"-61-3/8-121-3/8"-12
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.