1" Hex Bolt Head Size

Inch Hex Bolts

A 1" hex cap screw (ASME B18.2.1) takes a 1 1/2 in (38.1 mm) wrench. The head is 39/64 in (15.48 mm) high (basic) and up to 1.732 in (43.99 mm) across the corners. Threads: 8 TPI (3.175 mm) coarse (UNC) or 12 TPI (2.117 mm) fine (UNF).

FWidth across flats
38.1 mm1 1/2 in1 1/2 in38.1 mm
HHead height, cap screw (basic)
15.48 mm39/64 in39/64 in15.48 mm
GWidth across corners
43.99 mm1.732 in1.732 in43.99 mm
nCoarse thread (UNC)
3.175 mm8 TPI8 TPI3.175 mm

Drawing

G 43.99 mmG 1.732 in15.48 mm39/64 in1"
F 38.1 mmF 1 1/2 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

1" specifications

dMajor diameter1 in25.40 mm
FWidth across flats1 1/2 in38.1 mm
GWidth across corners1.732 in43.99 mm
HHead height, cap screw (basic)39/64 in15.48 mm
Head height, hex bolt (basic)43/64 in17.07 mm
Across flats, heavy hex1 5/8 in41.3 mm
nCoarse thread (UNC)8 TPI3.175 mm
nFine thread (UNF)12 TPI2.117 mm

Also known as

1-81-12

Wrench and socket for the 1"

1" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.