7/8" Hex Bolt Head Size

Inch Hex Bolts

A 7/8" hex cap screw (ASME B18.2.1) takes a 1 5/16 in (33.3 mm) wrench. The head is 35/64 in (13.89 mm) high (basic) and up to 1.516 in (38.51 mm) across the corners. Threads: 9 TPI (2.822 mm) coarse (UNC) or 14 TPI (1.814 mm) fine (UNF).

FWidth across flats
33.3 mm1 5/16 in1 5/16 in33.3 mm
HHead height, cap screw (basic)
13.89 mm35/64 in35/64 in13.89 mm
GWidth across corners
38.51 mm1.516 in1.516 in38.51 mm
nCoarse thread (UNC)
2.822 mm9 TPI9 TPI2.822 mm

Drawing

G 38.51 mmG 1.516 in13.89 mm35/64 in7/8"
F 33.3 mmF 1 5/16 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

7/8" specifications

dMajor diameter7/8 in22.22 mm
FWidth across flats1 5/16 in33.3 mm
GWidth across corners1.516 in38.51 mm
HHead height, cap screw (basic)35/64 in13.89 mm
Head height, hex bolt (basic)37/64 in14.68 mm
Across flats, heavy hex1 7/16 in36.5 mm
nCoarse thread (UNC)9 TPI2.822 mm
nFine thread (UNF)14 TPI1.814 mm

Also known as

7/8-97/8-14

Wrench and socket for the 7/8"

7/8" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.