1″ Thread: TPI, Tap Drill and Clearance Hole

UNC / UNF Threads

The 1″ unified thread has a major diameter of 1.0000 in (25.40 mm). Coarse thread (UNC): 8 TPI (3.175 mm), tap drill 7/8″. Fine thread (UNF): 12 TPI (2.117 mm), tap drill 59/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.

dMajor diameter
25.40 mm1.0000 in1.0000 in25.40 mm
UNC threads per inch
3.175 mm8 TPI8 TPI3.175 mm
UNC tap drill
7/8″
UNF threads per inch
2.117 mm12 TPI12 TPI2.117 mm

Drawing

⌀25.40 mm⌀1.0000 in⌀21.963 mm⌀0.8647 in3.175 mm8 TPI
3.175 mm8 TPI1.720 mm0.0677 inH₁60°
Side view at true pitch (coarse thread); basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

1″ specifications

dMajor diameter1.0000 in25.40 mm
UNC threads per inch8 TPI3.175 mm
UNC tap drill7/8″
UNC tap drill (decimal)0.8750 in22.22 mm
UNF threads per inch12 TPI2.117 mm
UNF tap drill59/64″
UNF tap drill (decimal)0.9219 in23.42 mm
UNEF threads per inch20 TPI1.270 mm
Clearance drill, close fit1-1/64″
Clearance drill, close (decimal)1.0156 in25.80 mm
Clearance drill, free fit1-1/32″
Clearance drill, free (decimal)1.0313 in26.20 mm
d₂Pitch diameter (basic)0.9188 in23.338 mm
D₁Minor diameter, nut (basic)0.8647 in21.963 mm

1″-8 UNC is the coarse thread; the fine thread is 1″-12 UNF. 1″-14 UNS is a special (non-series) thread still found on older equipment.

Also known as

1-81"-81-121"-12

Nearest metric thread sizes

All UNC / UNF Threads sizes

Compare all 24 sizes in the UNC / UNF Threads chart →

Sources

  1. ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
  2. Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
  3. Little Machine Shop: Tap and clearance drill sizes
  4. Starrett: Tap drill sizes, close and free fit clearance drills

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.