7/8″ Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The 7/8″ unified thread has a major diameter of 0.8750 in (22.22 mm). Coarse thread (UNC): 9 TPI (2.822 mm), tap drill 49/64″. Fine thread (UNF): 14 TPI (1.814 mm), tap drill 13/16″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 22.22 mm0.8750 in0.8750 in22.22 mm
- UNC threads per inch
- 2.822 mm9 TPI9 TPI2.822 mm
- UNC tap drill
- 49/64″
- UNF threads per inch
- 1.814 mm14 TPI14 TPI1.814 mm
Drawing
7/8″ specifications
| dMajor diameter | 0.8750 in22.22 mm |
|---|---|
| UNC threads per inch | 9 TPI2.822 mm |
| UNC tap drill | 49/64″ |
| UNC tap drill (decimal) | 0.7656 in19.45 mm |
| UNF threads per inch | 14 TPI1.814 mm |
| UNF tap drill | 13/16″ |
| UNF tap drill (decimal) | 0.8125 in20.64 mm |
| UNEF threads per inch | 20 TPI1.270 mm |
| Clearance drill, close fit | 57/64″ |
| Clearance drill, close (decimal) | 0.8906 in22.62 mm |
| Clearance drill, free fit | 29/32″ |
| Clearance drill, free (decimal) | 0.9063 in23.02 mm |
| d₂Pitch diameter (basic) | 0.8028 in20.391 mm |
| D₁Minor diameter, nut (basic) | 0.7547 in19.169 mm |
Also known as
7/8-97/8"-97/8-147/8"-14
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.