M24 Lock Washer Dimensions

Lock Washers

For an M24 bolt, the DIN 127 B split spring washer is 24.5 mm (0.965 in) inside (min), up to 40 mm (1.575 in) outside and 5 mm (0.197 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.

d2Split DIN 127 B: outside (max)
40 mm1.575 in1.575 in40 mm
sSplit DIN 127 B: thickness
5 mm0.197 in0.197 in5 mm

Drawing

⌀40 mm⌀1.575 in⌀24.5 mm⌀0.965 in
DIN 127 B split washer sections 5 mms 0.197 in
Top view: DIN 127 B split washerDrawn to scale · Dimensions in mmDimensions in inches

M24 specifications

d1Split DIN 127 B: inside (min)24.5 mm0.965 in
d2Split DIN 127 B: outside (max)40 mm1.575 in
sSplit DIN 127 B: thickness5 mm0.197 in

From M24 up, split washers are mostly used in structural steel and with low-strength bolts.

M24 in other charts

All Lock Washers sizes

Compare all 11 sizes in the Lock Washers chart →

Sources

  1. DIN 127: Spring lock washers with square or tang ends (withdrawn)
  2. DIN 6798: Serrated lock washers (withdrawn)
  3. DIN 6796:2009, Conical spring washers for bolted connections
  4. Westfield Fasteners: DIN 127 B spring washer table
  5. Westfield Fasteners: DIN 6796 conical spring washers
  6. Böllhoff: DIN 6798 A stainless A2 data sheet

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.