M24 Thread Size: Pitch, Tap Drill and Clearance Hole
Metric Threads
M24 is a metric thread with a major diameter of 24 mm (0.945 in) and a coarse pitch of 3 mm (8.5 TPI). Drill 21 mm (0.827 in) before tapping the coarse thread; the common fine thread is M24 × 2 mm, tapped with a 22 mm drill. For a bolt to pass through, drill a 26 mm (1.024 in) clearance hole (ISO 273 medium).
- PCoarse pitch
- 3 mm8.5 TPI8.5 TPI3 mm
- Tap drill, coarse
- 21 mm0.827 in0.827 in21 mm
- Clearance hole, medium
- 26 mm1.024 in1.024 in26 mm
- d₃Minor diameter, bolt
- 20.319 mm0.8000 in0.8000 in20.319 mm
Drawing
M24 specifications
| dMajor diameter | 24 mm0.945 in |
|---|---|
| PCoarse pitch | 3 mm8.5 TPI |
| Fine pitch (common) | 2 mm12.7 TPI |
| Fine pitches (ISO 261) | 2 · 1.5 · 1 |
| Tap drill, coarse | 21 mm0.827 in |
| Tap drill, fine | 22 mm0.866 in |
| d₂Pitch diameter | 22.051 mm0.8681 in |
| D₁Minor diameter, nut | 20.752 mm0.8170 in |
| d₃Minor diameter, bolt | 20.319 mm0.8000 in |
| Clearance hole, fine | 25 mm0.984 in |
| Clearance hole, medium | 26 mm1.024 in |
| Clearance hole, coarse | 28 mm1.102 in |
| ISO 261 size choice | 1st choice (preferred) |
Above M24 tap drills are often replaced by single-point threading or thread milling. The d − P drill (21 mm) still applies for tapping.
Also known as
M24x3M24x2
M24 in other charts
All Metric Threads sizes
Sources
- ISO 261:1998, ISO general purpose metric screw threads, general plan
- ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
- ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
- ISO 273:1979, Fasteners, clearance holes for bolts and screws
- Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
- DIN 336: Drill diameters for tapping holes (tap drill sizes)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.