M20 Lock Washer Dimensions
Lock Washers
For an M20 bolt, the DIN 127 B split spring washer is 20.2 mm (0.795 in) inside (min), up to 33.6 mm (1.323 in) outside and 4 mm (0.157 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 33.6 mm1.323 in1.323 in33.6 mm
- sSplit DIN 127 B: thickness
- 4 mm0.157 in0.157 in4 mm
- Tooth DIN 6798: outside
- 33 mm1.299 in1.299 in33 mm
- Conical DIN 6796: outside
- 45 mm1.772 in1.772 in45 mm
Drawing
M20 specifications
| d1Split DIN 127 B: inside (min) | 20.2 mm0.795 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 33.6 mm1.323 in |
| sSplit DIN 127 B: thickness | 4 mm0.157 in |
| Tooth DIN 6798: inside | 21 mm0.827 in |
| Tooth DIN 6798: outside | 33 mm1.299 in |
| Tooth DIN 6798: thickness | 1.4 mm0.055 in |
| Conical DIN 6796: inside | 21 mm0.827 in |
| Conical DIN 6796: outside | 45 mm1.772 in |
| Conical DIN 6796: thickness | 5 mm0.197 in |
| Conical DIN 6796: height (max) | 6.4 mm0.2520 in |
M20 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.