M14 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M14 is a metric thread with a major diameter of 14 mm (0.551 in) and a coarse pitch of 2 mm (12.7 TPI). Drill 12 mm (0.472 in) before tapping the coarse thread; the common fine thread is M14 × 1.5 mm, tapped with a 12.5 mm drill. For a bolt to pass through, drill a 15.5 mm (0.610 in) clearance hole (ISO 273 medium).

PCoarse pitch
2 mm12.7 TPI12.7 TPI2 mm
Tap drill, coarse
12 mm0.472 in0.472 in12 mm
Clearance hole, medium
15.5 mm0.610 in0.610 in15.5 mm
d₃Minor diameter, bolt
11.546 mm0.4546 in0.4546 in11.546 mm

Drawing

⌀14 mm⌀0.551 in⌀11.546 mm⌀0.4546 inP 2 mmP 12.7 TPI
P 2 mmP 12.7 TPI1.083 mm0.0426 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M14 specifications

dMajor diameter14 mm0.551 in
PCoarse pitch2 mm12.7 TPI
Fine pitch (common)1.5 mm16.9 TPI
Fine pitches (ISO 261)1.5 · 1.25 · 1
Tap drill, coarse12 mm0.472 in
Tap drill, fine12.5 mm0.492 in
d₂Pitch diameter12.701 mm0.5000 in
D₁Minor diameter, nut11.835 mm0.4659 in
d₃Minor diameter, bolt11.546 mm0.4546 in
Clearance hole, fine15 mm0.591 in
Clearance hole, medium15.5 mm0.610 in
Clearance hole, coarse16.5 mm0.650 in
ISO 261 size choice2nd choice

M14 × 1.25 is the classic spark-plug thread; M14 × 1.5 is a common wheel-bolt thread (VW, Audi, BMW, Mercedes). Both are listed under ISO 261 fine pitches.

Also known as

M14x2M14x1.5

Drill sizes for tapping M14

M14 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.