M16 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M16 is a metric thread with a major diameter of 16 mm (0.630 in) and a coarse pitch of 2 mm (12.7 TPI). Drill 14 mm (0.551 in) before tapping the coarse thread; the common fine thread is M16 × 1.5 mm, tapped with a 14.5 mm drill. For a bolt to pass through, drill a 17.5 mm (0.689 in) clearance hole (ISO 273 medium).

PCoarse pitch
2 mm12.7 TPI12.7 TPI2 mm
Tap drill, coarse
14 mm0.551 in0.551 in14 mm
Clearance hole, medium
17.5 mm0.689 in0.689 in17.5 mm
d₃Minor diameter, bolt
13.546 mm0.5333 in0.5333 in13.546 mm

Drawing

⌀16 mm⌀0.630 in⌀13.546 mm⌀0.5333 inP 2 mmP 12.7 TPI
P 2 mmP 12.7 TPI1.083 mm0.0426 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M16 specifications

dMajor diameter16 mm0.630 in
PCoarse pitch2 mm12.7 TPI
Fine pitch (common)1.5 mm16.9 TPI
Fine pitches (ISO 261)1.5 · 1
Tap drill, coarse14 mm0.551 in
Tap drill, fine14.5 mm0.571 in
d₂Pitch diameter14.701 mm0.5788 in
D₁Minor diameter, nut13.835 mm0.5447 in
d₃Minor diameter, bolt13.546 mm0.5333 in
Clearance hole, fine17 mm0.669 in
Clearance hole, medium17.5 mm0.689 in
Clearance hole, coarse18.5 mm0.728 in
ISO 261 size choice1st choice (preferred)

M16 × 1.5 is the normal fine pitch. M16 coarse uses a 14 mm tap drill and a 24 mm hex head.

Also known as

M16x2M16x1.5

M16 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.