M12 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M12 is a metric thread with a major diameter of 12 mm (0.472 in) and a coarse pitch of 1.75 mm (14.5 TPI). Drill 10.2 mm (0.402 in) before tapping the coarse thread; the common fine thread is M12 × 1.5 mm, tapped with a 10.5 mm drill. For a bolt to pass through, drill a 13.5 mm (0.531 in) clearance hole (ISO 273 medium).

PCoarse pitch
1.75 mm14.5 TPI14.5 TPI1.75 mm
Tap drill, coarse
10.2 mm0.402 in0.402 in10.2 mm
Clearance hole, medium
13.5 mm0.531 in0.531 in13.5 mm
d₃Minor diameter, bolt
9.853 mm0.3879 in0.3879 in9.853 mm

Drawing

⌀12 mm⌀0.472 in⌀9.853 mm⌀0.3879 inP 1.75 mmP 14.5 TPI
P 1.75 mmP 14.5 TPI0.947 mm0.0373 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M12 specifications

dMajor diameter12 mm0.472 in
PCoarse pitch1.75 mm14.5 TPI
Fine pitch (common)1.5 mm16.9 TPI
Fine pitches (ISO 261)1.5 · 1.25 · 1
Tap drill, coarse10.2 mm0.402 in
Tap drill, fine10.5 mm0.413 in
d₂Pitch diameter10.863 mm0.4277 in
D₁Minor diameter, nut10.106 mm0.3979 in
d₃Minor diameter, bolt9.853 mm0.3879 in
Clearance hole, fine13 mm0.512 in
Clearance hole, medium13.5 mm0.531 in
Clearance hole, coarse14.5 mm0.571 in
ISO 261 size choice1st choice (preferred)

M12 × 1.5 and M12 × 1.25 are both common wheel-stud threads: 1.5 on most European, American and Korean cars, 1.25 on many Nissan, Subaru and Suzuki models.

Also known as

M12x1.75M12x1.5

Drill sizes for tapping M12

M12 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.