M18 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M18 is a metric thread with a major diameter of 18 mm (0.709 in) and a coarse pitch of 2.5 mm (10.2 TPI). Drill 15.5 mm (0.610 in) before tapping the coarse thread; the common fine thread is M18 × 1.5 mm, tapped with a 16.5 mm drill. For a bolt to pass through, drill a 20 mm (0.787 in) clearance hole (ISO 273 medium).

PCoarse pitch
2.5 mm10.2 TPI10.2 TPI2.5 mm
Tap drill, coarse
15.5 mm0.610 in0.610 in15.5 mm
Clearance hole, medium
20 mm0.787 in0.787 in20 mm
d₃Minor diameter, bolt
14.933 mm0.5879 in0.5879 in14.933 mm

Drawing

⌀18 mm⌀0.709 in⌀14.933 mm⌀0.5879 inP 2.5 mmP 10.2 TPI
P 2.5 mmP 10.2 TPI1.353 mm0.0533 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M18 specifications

dMajor diameter18 mm0.709 in
PCoarse pitch2.5 mm10.2 TPI
Fine pitch (common)1.5 mm16.9 TPI
Fine pitches (ISO 261)2 · 1.5 · 1
Tap drill, coarse15.5 mm0.610 in
Tap drill, fine16.5 mm0.650 in
d₂Pitch diameter16.376 mm0.6447 in
D₁Minor diameter, nut15.294 mm0.6021 in
d₃Minor diameter, bolt14.933 mm0.5879 in
Clearance hole, fine19 mm0.748 in
Clearance hole, medium20 mm0.787 in
Clearance hole, coarse21 mm0.827 in
ISO 261 size choice2nd choice

Also known as

M18x2.5M18x1.5

M18 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.