M2.5 Thread Size: Pitch, Tap Drill and Clearance Hole
Metric Threads
M2.5 is a metric thread with a major diameter of 2.5 mm (0.098 in) and a coarse pitch of 0.45 mm (56.4 TPI). Drill 2.05 mm (0.081 in) before tapping the coarse thread; the common fine thread is M2.5 × 0.35 mm, tapped with a 2.15 mm drill. For a bolt to pass through, drill a 2.9 mm (0.114 in) clearance hole (ISO 273 medium).
- PCoarse pitch
- 0.45 mm56.4 TPI56.4 TPI0.45 mm
- Tap drill, coarse
- 2.05 mm0.081 in0.081 in2.05 mm
- Clearance hole, medium
- 2.9 mm0.114 in0.114 in2.9 mm
- d₃Minor diameter, bolt
- 1.948 mm0.0767 in0.0767 in1.948 mm
Drawing
M2.5 specifications
| dMajor diameter | 2.5 mm0.098 in |
|---|---|
| PCoarse pitch | 0.45 mm56.4 TPI |
| Fine pitch (common) | 0.35 mm72.6 TPI |
| Fine pitches (ISO 261) | 0.35 |
| Tap drill, coarse | 2.05 mm0.081 in |
| Tap drill, fine | 2.15 mm0.085 in |
| d₂Pitch diameter | 2.208 mm0.0869 in |
| D₁Minor diameter, nut | 2.013 mm0.0793 in |
| d₃Minor diameter, bolt | 1.948 mm0.0767 in |
| Clearance hole, fine | 2.7 mm0.106 in |
| Clearance hole, medium | 2.9 mm0.114 in |
| Clearance hole, coarse | 3.1 mm0.122 in |
| ISO 261 size choice | 1st choice (preferred) |
M2.5 is the standard mounting thread of Raspberry Pi boards and many small PCBs; M.2 SSD retaining screws are M2 × 0.4.
Also known as
M2.5x0.45M2.5x0.35
Drill sizes for tapping M2.5
M2.5 in other charts
All Metric Threads sizes
Sources
- ISO 261:1998, ISO general purpose metric screw threads, general plan
- ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
- ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
- ISO 273:1979, Fasteners, clearance holes for bolts and screws
- Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
- DIN 336: Drill diameters for tapping holes (tap drill sizes)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.