M22 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M22 is a metric thread with a major diameter of 22 mm (0.866 in) and a coarse pitch of 2.5 mm (10.2 TPI). Drill 19.5 mm (0.768 in) before tapping the coarse thread; the common fine thread is M22 × 1.5 mm, tapped with a 20.5 mm drill. For a bolt to pass through, drill a 24 mm (0.945 in) clearance hole (ISO 273 medium).

PCoarse pitch
2.5 mm10.2 TPI10.2 TPI2.5 mm
Tap drill, coarse
19.5 mm0.768 in0.768 in19.5 mm
Clearance hole, medium
24 mm0.945 in0.945 in24 mm
d₃Minor diameter, bolt
18.933 mm0.7454 in0.7454 in18.933 mm

Drawing

⌀22 mm⌀0.866 in⌀18.933 mm⌀0.7454 inP 2.5 mmP 10.2 TPI
P 2.5 mmP 10.2 TPI1.353 mm0.0533 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M22 specifications

dMajor diameter22 mm0.866 in
PCoarse pitch2.5 mm10.2 TPI
Fine pitch (common)1.5 mm16.9 TPI
Fine pitches (ISO 261)2 · 1.5 · 1
Tap drill, coarse19.5 mm0.768 in
Tap drill, fine20.5 mm0.807 in
d₂Pitch diameter20.376 mm0.8022 in
D₁Minor diameter, nut19.294 mm0.7596 in
d₃Minor diameter, bolt18.933 mm0.7454 in
Clearance hole, fine23 mm0.906 in
Clearance hole, medium24 mm0.945 in
Clearance hole, coarse26 mm1.024 in
ISO 261 size choice2nd choice

Also known as

M22x2.5M22x1.5

M22 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.