M27 Thread Size: Pitch, Tap Drill and Clearance Hole
Metric Threads
M27 is a metric thread with a major diameter of 27 mm (1.063 in) and a coarse pitch of 3 mm (8.5 TPI). Drill 24 mm (0.945 in) before tapping the coarse thread; the common fine thread is M27 × 2 mm, tapped with a 25 mm drill. For a bolt to pass through, drill a 30 mm (1.181 in) clearance hole (ISO 273 medium).
- PCoarse pitch
- 3 mm8.5 TPI8.5 TPI3 mm
- Tap drill, coarse
- 24 mm0.945 in0.945 in24 mm
- Clearance hole, medium
- 30 mm1.181 in1.181 in30 mm
- d₃Minor diameter, bolt
- 23.319 mm0.9181 in0.9181 in23.319 mm
Drawing
M27 specifications
| dMajor diameter | 27 mm1.063 in |
|---|---|
| PCoarse pitch | 3 mm8.5 TPI |
| Fine pitch (common) | 2 mm12.7 TPI |
| Fine pitches (ISO 261) | 2 · 1.5 · 1 |
| Tap drill, coarse | 24 mm0.945 in |
| Tap drill, fine | 25 mm0.984 in |
| d₂Pitch diameter | 25.051 mm0.9863 in |
| D₁Minor diameter, nut | 23.752 mm0.9351 in |
| d₃Minor diameter, bolt | 23.319 mm0.9181 in |
| Clearance hole, fine | 28 mm1.102 in |
| Clearance hole, medium | 30 mm1.181 in |
| Clearance hole, coarse | 32 mm1.260 in |
| ISO 261 size choice | 2nd choice |
Also known as
M27x3M27x2
M27 in other charts
All Metric Threads sizes
Sources
- ISO 261:1998, ISO general purpose metric screw threads, general plan
- ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
- ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
- ISO 273:1979, Fasteners, clearance holes for bolts and screws
- Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
- DIN 336: Drill diameters for tapping holes (tap drill sizes)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.