M4 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M4 is a metric thread with a major diameter of 4 mm (0.157 in) and a coarse pitch of 0.7 mm (36.3 TPI). Drill 3.3 mm (0.130 in) before tapping the coarse thread; the common fine thread is M4 × 0.5 mm, tapped with a 3.5 mm drill. For a bolt to pass through, drill a 4.5 mm (0.177 in) clearance hole (ISO 273 medium).

PCoarse pitch
0.7 mm36.3 TPI36.3 TPI0.7 mm
Tap drill, coarse
3.3 mm0.130 in0.130 in3.3 mm
Clearance hole, medium
4.5 mm0.177 in0.177 in4.5 mm
d₃Minor diameter, bolt
3.141 mm0.1237 in0.1237 in3.141 mm

Drawing

⌀4 mm⌀0.157 in⌀3.141 mm⌀0.1237 inP 0.7 mmP 36.3 TPI
P 0.7 mmP 36.3 TPI0.379 mm0.0149 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M4 specifications

dMajor diameter4 mm0.157 in
PCoarse pitch0.7 mm36.3 TPI
Fine pitch (common)0.5 mm50.8 TPI
Fine pitches (ISO 261)0.5
Tap drill, coarse3.3 mm0.130 in
Tap drill, fine3.5 mm0.138 in
d₂Pitch diameter3.545 mm0.1396 in
D₁Minor diameter, nut3.242 mm0.1276 in
d₃Minor diameter, bolt3.141 mm0.1237 in
Clearance hole, fine4.3 mm0.169 in
Clearance hole, medium4.5 mm0.177 in
Clearance hole, coarse4.8 mm0.189 in
ISO 261 size choice1st choice (preferred)

M4 is tapped with a 3.3 mm drill. Do not confuse it with #8-32 (4.17 mm, 0.794 mm pitch).

Also known as

M4x0.7M4x0.5

Drill sizes for tapping M4

M4 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.