M3 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M3 is a metric thread with a major diameter of 3 mm (0.118 in) and a coarse pitch of 0.5 mm (50.8 TPI). Drill 2.5 mm (0.098 in) before tapping the coarse thread; the common fine thread is M3 × 0.35 mm, tapped with a 2.65 mm drill. For a bolt to pass through, drill a 3.4 mm (0.134 in) clearance hole (ISO 273 medium).

PCoarse pitch
0.5 mm50.8 TPI50.8 TPI0.5 mm
Tap drill, coarse
2.5 mm0.098 in0.098 in2.5 mm
Clearance hole, medium
3.4 mm0.134 in0.134 in3.4 mm
d₃Minor diameter, bolt
2.387 mm0.0940 in0.0940 in2.387 mm

Drawing

⌀3 mm⌀0.118 in⌀2.387 mm⌀0.0940 inP 0.5 mmP 50.8 TPI
P 0.5 mmP 50.8 TPI0.271 mm0.0107 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M3 specifications

dMajor diameter3 mm0.118 in
PCoarse pitch0.5 mm50.8 TPI
Fine pitch (common)0.35 mm72.6 TPI
Fine pitches (ISO 261)0.35
Tap drill, coarse2.5 mm0.098 in
Tap drill, fine2.65 mm0.104 in
d₂Pitch diameter2.675 mm0.1053 in
D₁Minor diameter, nut2.459 mm0.0968 in
d₃Minor diameter, bolt2.387 mm0.0940 in
Clearance hole, fine3.2 mm0.126 in
Clearance hole, medium3.4 mm0.134 in
Clearance hole, coarse3.6 mm0.142 in
ISO 261 size choice1st choice (preferred)

M3 is the most-used small machine screw: PCB standoffs, 3D printers, electronics enclosures. Tap drill 2.5 mm, clearance 3.4 mm.

Also known as

M3x0.5M3x0.35

Drill sizes for tapping M3

M3 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.