M45 Thread Size: Pitch, Tap Drill and Clearance Hole
Metric Threads
M45 is a metric thread with a major diameter of 45 mm (1.772 in) and a coarse pitch of 4.5 mm (5.6 TPI). Drill 40.5 mm (1.594 in) before tapping the coarse thread; the common fine thread is M45 × 3 mm, tapped with a 42 mm drill. For a bolt to pass through, drill a 48 mm (1.890 in) clearance hole (ISO 273 medium).
- PCoarse pitch
- 4.5 mm5.6 TPI5.6 TPI4.5 mm
- Tap drill, coarse
- 40.5 mm1.594 in1.594 in40.5 mm
- Clearance hole, medium
- 48 mm1.890 in1.890 in48 mm
- d₃Minor diameter, bolt
- 39.479 mm1.5543 in1.5543 in39.479 mm
Drawing
M45 specifications
| dMajor diameter | 45 mm1.772 in |
|---|---|
| PCoarse pitch | 4.5 mm5.6 TPI |
| Fine pitch (common) | 3 mm8.5 TPI |
| Fine pitches (ISO 261) | 4 · 3 · 2 · 1.5 |
| Tap drill, coarse | 40.5 mm1.594 in |
| Tap drill, fine | 42 mm1.654 in |
| d₂Pitch diameter | 42.077 mm1.6566 in |
| D₁Minor diameter, nut | 40.129 mm1.5799 in |
| d₃Minor diameter, bolt | 39.479 mm1.5543 in |
| Clearance hole, fine | 46 mm1.811 in |
| Clearance hole, medium | 48 mm1.890 in |
| Clearance hole, coarse | 52 mm2.047 in |
| ISO 261 size choice | 2nd choice |
Also known as
M45x4.5M45x3
M45 in other charts
All Metric Threads sizes
Sources
- ISO 261:1998, ISO general purpose metric screw threads, general plan
- ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
- ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
- ISO 273:1979, Fasteners, clearance holes for bolts and screws
- Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
- DIN 336: Drill diameters for tapping holes (tap drill sizes)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.