M48 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M48 is a metric thread with a major diameter of 48 mm (1.890 in) and a coarse pitch of 5 mm (5.1 TPI). Drill 43 mm (1.693 in) before tapping the coarse thread; the common fine thread is M48 × 3 mm, tapped with a 45 mm drill. For a bolt to pass through, drill a 52 mm (2.047 in) clearance hole (ISO 273 medium).

PCoarse pitch
5 mm5.1 TPI5.1 TPI5 mm
Tap drill, coarse
43 mm1.693 in1.693 in43 mm
Clearance hole, medium
52 mm2.047 in2.047 in52 mm
d₃Minor diameter, bolt
41.866 mm1.6483 in1.6483 in41.866 mm

Drawing

⌀48 mm⌀1.890 in⌀41.866 mm⌀1.6483 inP 5 mmP 5.1 TPI
P 5 mmP 5.1 TPI2.706 mm0.1065 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M48 specifications

dMajor diameter48 mm1.890 in
PCoarse pitch5 mm5.1 TPI
Fine pitch (common)3 mm8.5 TPI
Fine pitches (ISO 261)4 · 3 · 2 · 1.5
Tap drill, coarse43 mm1.693 in
Tap drill, fine45 mm1.772 in
d₂Pitch diameter44.752 mm1.7619 in
D₁Minor diameter, nut42.587 mm1.6767 in
d₃Minor diameter, bolt41.866 mm1.6483 in
Clearance hole, fine50 mm1.969 in
Clearance hole, medium52 mm2.047 in
Clearance hole, coarse56 mm2.205 in
ISO 261 size choice1st choice (preferred)

Also known as

M48x5M48x3

M48 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.