M5 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M5 is a metric thread with a major diameter of 5 mm (0.197 in) and a coarse pitch of 0.8 mm (31.7 TPI). Drill 4.2 mm (0.165 in) before tapping the coarse thread; the common fine thread is M5 × 0.5 mm, tapped with a 4.5 mm drill. For a bolt to pass through, drill a 5.5 mm (0.217 in) clearance hole (ISO 273 medium).

PCoarse pitch
0.8 mm31.7 TPI31.7 TPI0.8 mm
Tap drill, coarse
4.2 mm0.165 in0.165 in4.2 mm
Clearance hole, medium
5.5 mm0.217 in0.217 in5.5 mm
d₃Minor diameter, bolt
4.019 mm0.1582 in0.1582 in4.019 mm

Drawing

⌀5 mm⌀0.197 in⌀4.019 mm⌀0.1582 inP 0.8 mmP 31.7 TPI
P 0.8 mmP 31.7 TPI0.433 mm0.0170 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M5 specifications

dMajor diameter5 mm0.197 in
PCoarse pitch0.8 mm31.7 TPI
Fine pitch (common)0.5 mm50.8 TPI
Fine pitches (ISO 261)0.5
Tap drill, coarse4.2 mm0.165 in
Tap drill, fine4.5 mm0.177 in
d₂Pitch diameter4.480 mm0.1764 in
D₁Minor diameter, nut4.134 mm0.1628 in
d₃Minor diameter, bolt4.019 mm0.1582 in
Clearance hole, fine5.3 mm0.209 in
Clearance hole, medium5.5 mm0.217 in
Clearance hole, coarse5.8 mm0.228 in
ISO 261 size choice1st choice (preferred)

M5 × 0.8 is close to #10-24 (4.83 mm, 1.058 mm pitch) and #10-32 (0.794 mm pitch), but they do not interchange.

Also known as

M5x0.8M5x0.5

Drill sizes for tapping M5

M5 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.