M7 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M7 is a metric thread with a major diameter of 7 mm (0.276 in) and a coarse pitch of 1 mm (25.4 TPI). Drill 6 mm (0.236 in) before tapping the coarse thread; the common fine thread is M7 × 0.75 mm, tapped with a 6.25 mm drill. For a bolt to pass through, drill a 7.6 mm (0.299 in) clearance hole (ISO 273 medium).

PCoarse pitch
1 mm25.4 TPI25.4 TPI1 mm
Tap drill, coarse
6 mm0.236 in0.236 in6 mm
Clearance hole, medium
7.6 mm0.299 in0.299 in7.6 mm
d₃Minor diameter, bolt
5.773 mm0.2273 in0.2273 in5.773 mm

Drawing

⌀7 mm⌀0.276 in⌀5.773 mm⌀0.2273 inP 1 mmP 25.4 TPI
P 1 mmP 25.4 TPI0.541 mm0.0213 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M7 specifications

dMajor diameter7 mm0.276 in
PCoarse pitch1 mm25.4 TPI
Fine pitch (common)0.75 mm33.9 TPI
Fine pitches (ISO 261)0.75
Tap drill, coarse6 mm0.236 in
Tap drill, fine6.25 mm0.246 in
d₂Pitch diameter6.350 mm0.2500 in
D₁Minor diameter, nut5.917 mm0.2330 in
d₃Minor diameter, bolt5.773 mm0.2273 in
Clearance hole, fine7.4 mm0.291 in
Clearance hole, medium7.6 mm0.299 in
Clearance hole, coarse8 mm0.315 in
ISO 261 size choice3rd choice (avoid)

M7 is a third-choice size. It is found mainly on older European cars and bicycles; bolts and taps are much harder to find than M6 or M8.

Also known as

M7x1M7x0.75

Drill sizes for tapping M7

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.