M8 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M8 is a metric thread with a major diameter of 8 mm (0.315 in) and a coarse pitch of 1.25 mm (20.3 TPI). Drill 6.8 mm (0.268 in) before tapping the coarse thread; the common fine thread is M8 × 1 mm, tapped with a 7 mm drill. For a bolt to pass through, drill a 9 mm (0.354 in) clearance hole (ISO 273 medium).

PCoarse pitch
1.25 mm20.3 TPI20.3 TPI1.25 mm
Tap drill, coarse
6.8 mm0.268 in0.268 in6.8 mm
Clearance hole, medium
9 mm0.354 in0.354 in9 mm
d₃Minor diameter, bolt
6.466 mm0.2546 in0.2546 in6.466 mm

Drawing

⌀8 mm⌀0.315 in⌀6.466 mm⌀0.2546 inP 1.25 mmP 20.3 TPI
P 1.25 mmP 20.3 TPI0.677 mm0.0266 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M8 specifications

dMajor diameter8 mm0.315 in
PCoarse pitch1.25 mm20.3 TPI
Fine pitch (common)1 mm25.4 TPI
Fine pitches (ISO 261)1 · 0.75
Tap drill, coarse6.8 mm0.268 in
Tap drill, fine7 mm0.276 in
d₂Pitch diameter7.188 mm0.2830 in
D₁Minor diameter, nut6.647 mm0.2617 in
d₃Minor diameter, bolt6.466 mm0.2546 in
Clearance hole, fine8.4 mm0.331 in
Clearance hole, medium9 mm0.354 in
Clearance hole, coarse10 mm0.394 in
ISO 261 size choice1st choice (preferred)

M8 is the most common general-purpose bolt size. Coarse M8 × 1.25 uses a 6.8 mm tap drill; fine M8 × 1 uses 7.0 mm. A standard M8 hex bolt has a 13 mm head.

Also known as

M8x1.25M8x1

Drill sizes for tapping M8

M8 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.