0.5 mm² Wire: Resistance, Diameter, AWG

Metric Wire Sizes

A 0.5 mm² copper conductor (IEC 60228) may have at most 36 Ω/km (10.9728 Ω/1000 ft) DC resistance at 20 °C as a solid or stranded conductor (class 1 or 2), or 39 Ω/km (11.8872 Ω/1000 ft) as a flexible conductor (class 5). A solid round conductor of this area is 0.80 mm (0.0315 in) in diameter. The nearest AWG size is 20 AWG.

SNominal cross-section
0.5 mm²
RMax. resistance, class 1/2 (solid, stranded)
36 Ω/km10.9728 Ω/1000 ft10.9728 Ω/1000 ft36 Ω/km
RMax. resistance, class 5 (flexible)
39 Ω/km11.8872 Ω/1000 ft11.8872 Ω/1000 ft39 Ω/km
Nearest AWG
20 AWG

Drawing

⌀0.80 mm⌀0.0315 in0.5 mm²Solid round conductor, nominal area
0.5 mm² / 20 AWG20 AWG: 0.52 mm² (+4 %)
Left: solid round conductor of the nominal area. Right: the same with the nearest AWG / kcmil size overlaid (orange).Drawn to scale · Dimensions in mmDimensions in inches

0.5 mm² specifications

SNominal cross-section0.5 mm²
dSolid conductor diameter (calc.)0.80 mm0.0315 in
Area in kcmil0.987 kcmil
RMax. resistance, class 1/2 (solid, stranded)36 Ω/km10.9728 Ω/1000 ft
RMax. resistance, class 5 (flexible)39 Ω/km11.8872 Ω/1000 ft
Nearest AWG20 AWG
Smallest AWG with at least this area20 AWG

0.5 mm² is the smallest IEC size in common use for light flexible cords and control wiring; it matches 20 AWG (0.52 mm²) closely.

Comparable AWG sizes

All Metric Wire Sizes sizes

Compare all 19 sizes in the Metric Wire Sizes chart →

Sources

  1. IEC 60228:2023, Conductors of insulated cables (Tables 1, 2/4 and 5: class 1, 2 and 5 copper, maximum resistance at 20 °C)
  2. Lapp: T11 Conductor resistances and strand structure, metric (based on IEC/EN 60228)
  3. Bayka: Conductor resistance (IEC 60228 / VDE 0295)
  4. ASTM B258: AWG nominal diameters and areas (for the AWG comparison)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.