0.75 mm² Wire: Resistance, Diameter, AWG

Metric Wire Sizes

A 0.75 mm² copper conductor (IEC 60228) may have at most 24.5 Ω/km (7.4676 Ω/1000 ft) DC resistance at 20 °C as a solid or stranded conductor (class 1 or 2), or 26 Ω/km (7.9248 Ω/1000 ft) as a flexible conductor (class 5). A solid round conductor of this area is 0.98 mm (0.0386 in) in diameter. The nearest AWG size is 18 AWG.

SNominal cross-section
0.75 mm²
RMax. resistance, class 1/2 (solid, stranded)
24.5 Ω/km7.4676 Ω/1000 ft7.4676 Ω/1000 ft24.5 Ω/km
RMax. resistance, class 5 (flexible)
26 Ω/km7.9248 Ω/1000 ft7.9248 Ω/1000 ft26 Ω/km
Nearest AWG
18 AWG

Drawing

⌀0.98 mm⌀0.0386 in0.75 mm²Solid round conductor, nominal area
0.75 mm² / 18 AWG18 AWG: 0.82 mm² (+10 %)
Left: solid round conductor of the nominal area. Right: the same with the nearest AWG / kcmil size overlaid (orange).Drawn to scale · Dimensions in mmDimensions in inches

0.75 mm² specifications

SNominal cross-section0.75 mm²
dSolid conductor diameter (calc.)0.98 mm0.0386 in
Area in kcmil1.48 kcmil
RMax. resistance, class 1/2 (solid, stranded)24.5 Ω/km7.4676 Ω/1000 ft
RMax. resistance, class 5 (flexible)26 Ω/km7.9248 Ω/1000 ft
Nearest AWG18 AWG
Smallest AWG with at least this area18 AWG

0.75 mm² is the most common size for flexible appliance and lamp cords (H05VV-F 2×0.75, 3G0.75), rated for about 6 A in cord sets. It is slightly smaller than 18 AWG (0.82 mm²).

Comparable AWG sizes

All Metric Wire Sizes sizes

Compare all 19 sizes in the Metric Wire Sizes chart →

Sources

  1. IEC 60228:2023, Conductors of insulated cables (Tables 1, 2/4 and 5: class 1, 2 and 5 copper, maximum resistance at 20 °C)
  2. Lapp: T11 Conductor resistances and strand structure, metric (based on IEC/EN 60228)
  3. Bayka: Conductor resistance (IEC 60228 / VDE 0295)
  4. ASTM B258: AWG nominal diameters and areas (for the AWG comparison)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.