143T Motor Frame Dimensions
Motor Frame Sizes · NEMA MG 1 (inch)
The 143T frame (NEMA MG 1, inch) has a shaft height of 3 1/2 in (88.9 mm) and a 7/8 in (22.2 mm) shaft 2 1/4 in (57.2 mm) long. Foot holes: 5 1/2 in (139.7 mm) across × 4 in (101.6 mm) along, the first one 2 1/4 in (57.2 mm) from the shaft shoulder; hole diameter 11/32 in (8.7 mm).
- HShaft height (IEC H / NEMA D)
- 88.9 mm3 1/2 in3 1/2 in88.9 mm
- DShaft diameter (IEC D / NEMA U)
- 22.2 mm7/8 in7/8 in22.2 mm
- AFoot holes across (IEC A / NEMA 2E)
- 139.7 mm5 1/2 in5 1/2 in139.7 mm
- BFoot holes along (IEC B / NEMA 2F)
- 101.6 mm4 in4 in101.6 mm
Drawing
143T specifications
| HShaft height (IEC H / NEMA D) | 88.9 mm3 1/2 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 139.7 mm5 1/2 in |
| BFoot holes along (IEC B / NEMA 2F) | 101.6 mm4 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 57.2 mm2 1/4 in |
| KFoot bolt hole (IEC K / NEMA H) | 8.7 mm11/32 in |
| DShaft diameter (IEC D / NEMA U) | 22.2 mm7/8 in |
| EShaft extension (IEC E / NEMA N-W) | 57.2 mm2 1/4 in |
143T and 145T are identical except for the 2F hole spacing (4.0 in against 5.0 in). Many bases are drilled for both.
Same shaft height, other foot length
Similar shaft height in the other system
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.