56 (NEMA) Motor Frame Dimensions

Motor Frame Sizes · NEMA MG 1 (inch)

The 56 (NEMA) frame (NEMA MG 1, inch) has a shaft height of 3 1/2 in (88.9 mm) and a 5/8 in (15.9 mm) shaft 1 7/8 in (47.6 mm) long. Foot holes: 4 7/8 in (123.8 mm) across × 3 in (76.2 mm) along, the first one 2 3/4 in (69.9 mm) from the shaft shoulder; hole diameter 11/32 in (8.7 mm).

HShaft height (IEC H / NEMA D)
88.9 mm3 1/2 in3 1/2 in88.9 mm
DShaft diameter (IEC D / NEMA U)
15.9 mm5/8 in5/8 in15.9 mm
AFoot holes across (IEC A / NEMA 2E)
123.8 mm4 7/8 in4 7/8 in123.8 mm
BFoot holes along (IEC B / NEMA 2F)
76.2 mm3 in3 in76.2 mm

Drawing

Drive-end view2E = 123.8 mm2E = 4 7/8 inD = 88.9 mmD = 3 1/2 in
Side view2F = 76.2 mm2F = 3 inBA = 69.9 mmBA = 2 3/4 inN-W = 47.6 mmN-W = 1 7/8 inU = 15.9 mmU = 5/8 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

56 (NEMA) specifications

HShaft height (IEC H / NEMA D)88.9 mm3 1/2 in
AFoot holes across (IEC A / NEMA 2E)123.8 mm4 7/8 in
BFoot holes along (IEC B / NEMA 2F)76.2 mm3 in
CShaft shoulder to first hole (IEC C / NEMA BA)69.9 mm2 3/4 in
KFoot bolt hole (IEC K / NEMA H)8.7 mm11/32 in
DShaft diameter (IEC D / NEMA U)15.9 mm5/8 in
EShaft extension (IEC E / NEMA N-W)47.6 mm1 7/8 in

NEMA 56 is a fractional-horsepower frame (typically up to about 1.5 hp at 1800 rpm). Many 56-frame motors have slotted feet that also accept the 5 in 2F hole spacing of the 56H variant.

Same shaft height, other foot length

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.