160L Motor Frame Dimensions
Motor Frame Sizes · IEC 60072-1 (mm)
The 160L frame (IEC 60072-1, mm) has a shaft height of 160 mm (6.299 in) and a 42 mm (1.654 in) shaft 110 mm (4.331 in) long. Foot holes: 254 mm (10 in) across × 254 mm (10 in) along, the first one 108 mm (4.252 in) from the shaft shoulder; hole diameter 14.5 mm (0.571 in).
- HShaft height (IEC H / NEMA D)
- 160 mm6.299 in6.299 in160 mm
- DShaft diameter (IEC D / NEMA U)
- 42 mm1.654 in1.654 in42 mm
- AFoot holes across (IEC A / NEMA 2E)
- 254 mm10 in10 in254 mm
- BFoot holes along (IEC B / NEMA 2F)
- 254 mm10 in10 in254 mm
Drawing
160L specifications
| HShaft height (IEC H / NEMA D) | 160 mm6.299 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 254 mm10 in |
| BFoot holes along (IEC B / NEMA 2F) | 254 mm10 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 108 mm4.252 in |
| KFoot bolt hole (IEC K / NEMA H) | 14.5 mm0.571 in |
| DShaft diameter (IEC D / NEMA U) | 42 mm1.654 in |
| EShaft extension (IEC E / NEMA N-W) | 110 mm4.331 in |
Same shaft height, other foot length
Similar shaft height in the other system
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.