160M Motor Frame Dimensions

Motor Frame Sizes · IEC 60072-1 (mm)

The 160M frame (IEC 60072-1, mm) has a shaft height of 160 mm (6.299 in) and a 42 mm (1.654 in) shaft 110 mm (4.331 in) long. Foot holes: 254 mm (10 in) across × 210 mm (8.268 in) along, the first one 108 mm (4.252 in) from the shaft shoulder; hole diameter 14.5 mm (0.571 in).

HShaft height (IEC H / NEMA D)
160 mm6.299 in6.299 in160 mm
DShaft diameter (IEC D / NEMA U)
42 mm1.654 in1.654 in42 mm
AFoot holes across (IEC A / NEMA 2E)
254 mm10 in10 in254 mm
BFoot holes along (IEC B / NEMA 2F)
210 mm8.268 in8.268 in210 mm

Drawing

Drive-end viewA = 254 mmA = 10 inH = 160 mmH = 6.299 in
Side viewB = 210 mmB = 8.268 inC = 108 mmC = 4.252 inE = 110 mmE = 4.331 in⌀D = 42 mm⌀D = 1.654 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

160M specifications

HShaft height (IEC H / NEMA D)160 mm6.299 in
AFoot holes across (IEC A / NEMA 2E)254 mm10 in
BFoot holes along (IEC B / NEMA 2F)210 mm8.268 in
CShaft shoulder to first hole (IEC C / NEMA BA)108 mm4.252 in
KFoot bolt hole (IEC K / NEMA H)14.5 mm0.571 in
DShaft diameter (IEC D / NEMA U)42 mm1.654 in
EShaft extension (IEC E / NEMA N-W)110 mm4.331 in

Same shaft height, other foot length

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.