254T Motor Frame Dimensions

Motor Frame Sizes · NEMA MG 1 (inch)

The 254T frame (NEMA MG 1, inch) has a shaft height of 6 1/4 in (158.8 mm) and a 1 5/8 in (41.3 mm) shaft 4 in (101.6 mm) long. Foot holes: 10 in (254 mm) across × 8 1/4 in (209.6 mm) along, the first one 4 1/4 in (108 mm) from the shaft shoulder; hole diameter 17/32 in (13.5 mm).

HShaft height (IEC H / NEMA D)
158.8 mm6 1/4 in6 1/4 in158.8 mm
DShaft diameter (IEC D / NEMA U)
41.3 mm1 5/8 in1 5/8 in41.3 mm
AFoot holes across (IEC A / NEMA 2E)
254 mm10 in10 in254 mm
BFoot holes along (IEC B / NEMA 2F)
209.6 mm8 1/4 in8 1/4 in209.6 mm

Drawing

Drive-end view2E = 254 mm2E = 10 inD = 158.8 mmD = 6 1/4 in
Side view2F = 209.6 mm2F = 8 1/4 inBA = 108 mmBA = 4 1/4 inN-W = 101.6 mmN-W = 4 inU = 41.3 mmU = 1 5/8 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

254T specifications

HShaft height (IEC H / NEMA D)158.8 mm6 1/4 in
AFoot holes across (IEC A / NEMA 2E)254 mm10 in
BFoot holes along (IEC B / NEMA 2F)209.6 mm8 1/4 in
CShaft shoulder to first hole (IEC C / NEMA BA)108 mm4 1/4 in
KFoot bolt hole (IEC K / NEMA H)13.5 mm17/32 in
DShaft diameter (IEC D / NEMA U)41.3 mm1 5/8 in
EShaft extension (IEC E / NEMA N-W)101.6 mm4 in

Same shaft height, other foot length

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.